Model No.
APSP-80V200A-2Q/480UL
Product Name
UL Certified Lithium Battery Charger with Two REMA Plugs APSP-80V200A-2Q/480UL
PRODUCT VIDEO
INSTRUCTION DRAWING
CHARACTERISTICS & ADVANTAGES
-
High input power factor, low current harmonics, small voltage and current ripple, high conversion efficiency up to 94% and high density of module power due to PFC+LLC soft switching technology.
01 -
Supporting wide input voltage range 384V~528V to provide battery with stable and reliable charging under unstable power supply. Output voltage can adapt to the battery.
02 -
With the feature of CAN communication, it can communicate with lithium battery BMS to intelligently manage battery charging to ensure reliable, safe, fast charging and longer battery life.
03 -
Ergonomic appearance design and user-friendly UI including LCD display, TP, LED indication light, buttons to show charging information and status, allow different operations, make different settings.
04 -
With protection of overcharge, over-voltage, over-current, over-temperature, short circuit, input phase loss, input over-voltage, input under-voltage, lithium battery abnormal charging, etc. Able to diagnose and display charging problems.
05 -
Hot-pluggable and modularized design, simplifying component maintenance and replacement and decreasing MTTR (Mean Time To Repair).
06 -
UL certified by TUV.
07 -
Able to do “1 EV charger charging 1 lithium battery pack with 2 charging ports by 2 REMA plugs” or “1 EV charger charging 2 lithium battery packs at the same time by 2 REMA plugs separately”.
08
APPLICATION
To provide fast, safe and smart charging for lithium battery packs or industrial vehicles powered by lithium battery, including electric forklift, electric aerial work platform, electric watercraft, electric excavator, electric loader, etc.
SPECIFICATIONS
|
Model |
APSP-80V200A-2Q/480UL |
|
DC Output |
|
|
Rated Output Power |
32KW |
|
Rated Output Current |
200A/REMA plug |
|
Output Voltage Range |
30VDC-100VDC/REMA plug |
|
Current Adjustable Range |
5A-200A/REMA plug |
|
Ripple Wave |
≤1% |
|
Stable Voltage Precision |
≤±0.5% |
|
Efficiency |
≥92% |
|
Protection |
Short circuit, Overcurrent, Overvoltage, Reverse Connection |
|
AC Input |
|
|
Rated Input Voltage Degree |
Three-phase four-wire 480VAC |
|
Input Voltage Range |
384VAC~528VAC |
|
Input Current Range |
≤58A |
|
Frequency |
50Hz~60Hz |
|
Power Factor |
≥0.99 |
|
Current distortion |
≤5% |
|
Input Protection |
Overvoltage, Under-voltage, Overcurrent and Phase Loss |
|
Working Environment |
|
|
Working Environment Temperature |
-20%~45℃, working normally; |
|
Storage Temperature |
-40℃ ~75℃ |
|
Relative Humidity |
0~95% |
|
Altitude |
≤2000m full load output; |
|
Product Safety And Reliability |
|
|
Insulation Strength |
IN-OUT: 2200VDC IN-SHELL: 2200VDC OUT-SHELL: 1700VDC |
|
Dimensions And Weight |
|
|
Outline Dimensions |
800×560×430mm |
|
Net Weight |
85kg |
|
Protection Class |
IP20 |
|
Others |
|
|
Output Connector |
REMA plug |
|
Cooling |
Forced air cooling |
INSTALLATION GUIDE
Unpack the wooden box. Please do use professional tools.
With a screwdriver, disassemble the screws at the bottom of the wooden box that fix the charger.
Put the charger on the horizontal and adjust the legs to ensure the right charging position. Make sure obstacles are more than 0.5M away from the left and right sides of the charger.
On the condition that the charger’s switch is off, well connect the charger’s plug with the socket based on the number of phase. Do ask professionals to do this work please.
Dos And Don’Ts In Installation
- Put the charger on the horizontal. Put the charger on something that is heat-resistant. Do NOT put it upside down. Do NOT make it slope.
- The charger need enough room for cooling. Make sure the distance between the air inlet and the wall is more than 300mm, and the distance between the wall and the air outlet is more than 1000mm.
- The charger will produce heat when working. To ensure good cooling, please make sure the charger works in an environment where temperature is -20%~45℃.
- Make sure that foreign objects such as fibers, paper pieces, wood chips or metal fragments will NOT go inside the charger, or fire may be caused.
- Please well cover the 2 REMA plugs with the plastic caps when the charger is NOT in use.
- The ground terminal MUST be well grounded to prevent electric shock or fire.
OPERATION GUIDE
Operation Guide for Scenario of "1 EV Charger Charging 1 Lithium Battery Pack with 2 Charging Ports":
-
01
Make sure that power cables are correctly connected.
-
02
Connect the EV charger’s 2 REMA plugs, namely, REMA Plug A and REMA Plug B to the Lithium battery Pack with 2 charging ports.
-
03
Push the on/off switch to power the charger off.
-
04
Press the Start Button A and Start Button B to start charging.
-
05
After the battery is fully charged, press the Stop Button A and Stop Button B to stop charging.
-
06
Disconnect the 2 REMA plugs, and put the 2 REMA plugs and their cables on the 2 hooks at the 2 sides of the charger separately.
-
07
Push the on/off switch to switch the charger on.
Operation Guide for Scenario of "1 EV Charger Charging 2 Lithium Battery Packs at the Same Time":
-
01
Make sure that power cables are correctly connected.
-
02
Connect the EV charger’s REMA Plug A to one Lithium battery Pack , and REMA Plug B to the other Lithium battery Pack.
-
03
Push the on/off switch to switch the charger on.
-
04
Press the Start Button A and Start Button B to start charging the 2 Lithium battery Packs separately at the same time.
-
05
After 2 Lithium battery Packs are fully charged, press the Stop Button A and Stop Button B to stop charging.
-
06
Disconnect the 2 REMA plugs, and put the 2 REMA plugs and their cables on the 2 hooks at the 2 sides of the charger separately.
-
07
Push the on/off switch to power the charger off.
Dos and Don’ts In Operation
- Make sure the REMA connectors and plugs are NOT wet and foreign objects are NOT inside the charger before using.
- Make sure obstacles are more than 0.5M away from the charger.
- Clean the air inlet and outlet every 30 calendar days.
- Do not disassemble the charger by yourself, or electric shock will be caused. charger might be damaged during your disassembling and you may not enjoy after-sale service due to that.
Dos and Don'ts in Using REMA Plug
- The REMA plugs must be connected correctly. Make sure that the buckle is well put in the charging port, or the charging will fail.
- Do NOT use the REMA plugs in rough way. Use it carefully and softly.
- When the charger is not in use, cover the REMA plugs with the plastic caps to prevent dust or water from entering inside the plugs.
- Do NOT put the REMA plugs on the ground casually. Put them in specified place or on the hooks.
